GKI 6029
MANUFACTURER: GLAMOX / AQUA SIGNAL
NOTE: THIS PRODUCT IS GENERALLY STOCK AT THE FACTORY IN KATY TX
DESCRIPTON:
LED MARINE STAINLESS STEEL LINEAR FIXTURE (OUTSIDE TYPE), 48 INCH, 120V–277VAC INPUT VOLTAGE, TWO LED SMD ARRAYS (80,000 HOUR LIFE SPAN), 4000 KELVIN COLOR TEMPERATURE, 50–60HZ, STAINLESS STEEL BODY (304), DEEP DRAWN & SEAMLESS CONSTRUCTION WITH NO PENETRATIONS, EPOXY POWDER COATED WHITE RAL 9016, CLEAR UV AND IMPACT RESISTANT POLYCARBONATE DIFFUSER, POLYURETHANE FOAM GASKET MOLDED INTO THE DIFFUSER, STAINLESS STEEL LATCHES / HARDWARE, 2 CABLE ENTRIES PER SIDE, 2 X M25 POLYAMIDE CABLE GLANDS PROVIDED, 2 X M25 BLIND PLUGS PROVIDED, IP67, VAPOR TIGHT / VAPOR PROOF, MOUNTING PERFORMED USING BRACKETS ON BOTTOM OF FIXTURE
ELECTRICAL:
VOLTAGE: 120V – 277VAC (INPUT VOLTAGE)
MINIMUM FREQUENCY: 50HZ
MAXIMUM FREQUENCY: 60HZ
BALLAST TYPE HF (HIGH FREQUENCY)
BODY:
MATERIAL: STAINLESS STEEL (304)
BODY COLOR: WHITE
PROCESS: EPOXY POWDER COATED PAINT RAL 9016
OPTICS:
CLEAR POLYCARBONATE LENS (IMPACT RESISTANT, UV RESISTANT)
LIGHT SOURCE:
LED (80,000 HOUR LIFE)
SMD ARRAYS
COLOR TEMPERATURE: 4000 KELVIN (ALSO AVAILABLE IN 5000K)
LUMENS 4700 LM
CRI 80
HARDWARE:
MARINE DUTY STAINLESS STEEL LATCHES AND HARDWARE
TERMINATION:
CABLE ENTRIES: 2 PER SIDE
CABLE GLAND: 2 X M25 POLYAMIDE
BLIND PLUGS: 2 X M25
THROUGH WIRING
TECHNICAL DATA:
MAXIMUM AMBIENT TEMPERATURE 45C / 113F
MINUMUM AMBIENT TEMPERATURE -30C / -22F
APPROVALS:
UL1598 / UL1598A OUTDOOR MARINE TYPE SALTWATER
IP67 WATERTIGHT
CORROSION CLASS C3
OPTIONS:
GKI LED REPLACEMENT KITS AVAILABLE FOR CONVERSION OF EXISTING AQUA SIGNAL FLUORESCENT FIXTURES (SIMPLE GEAR TRAY CHANGE)
ALSO AVAILABLE IN 5000K COLOR TEMPERATURE
OPTIONAL ALUMINUM / ZINK HOUSING AVAILABLE
OPTIONAL 90 MINUTE BATTERY BACKUP AVAILABLE
OPTIONAL BRASS CABLE GLANDS
OPTIONAL MOUNTING BRACKETS
APPLICATIONS:
MARINE ENVIRONMENTS (OUTSIDE)
HEAVY VIBRATION
ENGINE ROOMS
STORES
PASSAGEWAYS
WORKSHOPS
HOSEDOWN APPLICATIONS
ADVANTAGES:
LOWER POWER CONSUMPTION THAN FLUORESCENT TUBES
NO MAINTENANCE, LIFE-TIME > 80,000 HOURS
REDUCES LABOR COSTS DRAMATICALLY
NOT SENSITIVE TO IMPACT, SHOCK OR VIBRATION
NO FLICKER OR HUMMING
NO FLUORESCENT TUBE DISPOSAL FEES
ECO FRIENDLY - NO UV, IR, LEAD, MERCURY, AIR POLLUTION ASSOCIATED WITH FLUORESCENT TUBES
LOW POWER INPUT, HIGH EFFICIENCY OUTPUT
NO NEED TO REPLACE BULBS IN HAZARDOUS LOCATIONS OR CONDITIONS
WIDE RANGE INPUT VOLTAGE 120V – 277VAC
LOWER LIABILITY COSTS
WILL PAY FOR ITSELF WITH ENERGY AND MAINTENANCE SAVINGS
ENVIRONMENTALLY FRIENDLY
WARRANTY: 5 YEARS
DIMENSIONS:
LENGTH: 1334MM / 52.52”
WIDTH: 165MM / 6.50”
HEIGHT: 128MM / 5.04”
WEIGHT: 8.16 KG / 18 LBS.
